When your dryer isn’t heating up, it can be a huge inconvenience. You might not be able to do laundry, and you could even end up with a damaged appliance if you don’t get it fixed soon. In this blog post, we will discuss 7 solutions that you can try to get your dryer working again. Hopefully one of these solutions will work for you!
Reasons why dryer not heating:
– The dryer may be turned off. Check to see if the dryer is turned on at the power outlet or switch. If it is, then check to see if the timer is set correctly.
– The lint screen may be blocked. Lint can build up over time and block the flow of air, causing the dryer not to heat up. Clean out the lint screen and make sure there’s no lint blocking the air flow.
– The heating element may be damaged. If the heating element is damaged, it will need to be replaced. This is a job that should be done by a professional.
– There may be a problem with the venting system. If the vents are blocked or kinked, it can cause the dryer not to heat up. Make sure the vents are clear and there’s no blockage.
– The thermal fuse may be blown. The thermal fuse is a safety device that shuts off the power to the dryer if it gets too hot. If the thermal fuse is blown, it will need to be replaced.
– There may be a problem with the gas supply. If you have a gas dryer, make sure there’s no blockage in the gas line and that the shut-off valve is turned on.
– There may be an issue with the electrical supply. If you have an electric dryer, make sure that the circuit breaker is not tripped and that there’s no power.
7 Solutions to Get Your Dryer Working Again
If your dryer isn’t heating up, don’t despair! There are a few things that you can try to fix the problem.
First, check to make sure that the dryer is plugged in and that the circuit breaker has not been tripped. If everything looks fine there, then move on to checking the lint screen. Make sure that there is no lint blocking the airflow to the heating element.
If none of those solutions work, then you might need to call a repairman. However, before you do that, you can try troubleshooting the problem yourself by checking the thermal fuse or thermostat. These are usually located near the heating element. If either of these components is damaged, it could be causing your dryer not to heat up.
Another possibility is that the venting system is blocked. This can happen if lint builds up in the vents, so be sure to check them for blockages.
Finally, if all else fails, you can always buy a new dryer! We hope that one of these solutions works for you and gets your dryer up and running again soon. Thanks for reading!
Plug the dryer in and turn it on to test whether it’s heating. If it doesn’t heat, unplug the dryer and clean off any lint from around the heating element (inside the dryer drum) with a vacuum attachment or by hand. Also, check and clear the lint screen and the exhaust vent. If the heating element is damaged, you’ll need to replace it.
If your dryer still won’t heat after taking these steps, contact a professional for help troubleshooting the issue. They may need to replace other parts, such as the thermal fuse or thermostat. These are usually located near the heating element.
Before you call a professional, be sure to check your home’s wiring. A tripped circuit breaker or blown fuse can cause a dryer to stop working. If you find that the circuit breaker has been tripped, reset it and try running your dryer again. If it trips again, there may be an issue with your home.